The Gund Company now offers the E5 Frac balls from Protek. These are a proven leader in the market, whether you are needing a higher performance for frac, or used in your sleeve or casing applications.  Protek Frac balls are designed to out-perform in the harshest environments around.

We offer in all sizes from 0.75”- 4-5/8”, and can provide a wide range of weights with Specific Gravity of 1.89 to meet your job requirements. 

 

E5HBM “Red” Ball

E5HBM is the workhorse frac ball that is suitable for 90% of ball-related applications. 

  • Specific Gravity of 1.9
  • Suitable up to 10,000 psi in most scenarios
  • Tg = 180C / 350F
  • Fiberglass Substrate with Epoxy Resin
  • Stratified Ball
  • Chemical Resistant / Non Corrosive / Non Spark

 

EMG96 “Black” Ball

EMG96 is a high-performance  & high-temperature frac ball.

  • Specific Gravity of 1.5
  • Suitable up to 15,000 psi in specific scenarios
  • Tg = 206C / 400F
  • Carbon Fiber Substrate with Epoxy Resin
  • Stratified Ball
  • Chemical Resistant / Non Corrosive / Non Spark

 

MLG87 Ball

We can also offer cost-effective, low-pressure molded frac balls without buying a mold at 1.75”, 2”, 2.125”, and 2.375” balls off the shelf with no tooling costs to you.  

  • Specific Gravity of 1.15
  • Suitable up to 10,000 psi with large differential bearing
  • Tg = 146C / 300F
  • Nylon 6-6 with fiber reinforcement
  • Homogeneous machined ball
  • Chemical Resistant / Non Corrosive / Non Spark

 

If there is an application that does not fit in these ranges, please contact us and we can help! 

We also have performance testing capabilities for composite tools! Click here to view our test service offerings.